By Jess Embling

Microwave sterilizer bags are an ideal way to sterilize all your baby’s bottles, as well as other feeding accessories. The bags are easy to use and require no special skills. These bags are light weight and compact, making then great for trips.

The following instructions are provided to help you use your microwave bags, and are also often listed on the back of each individual bag. Most sterilizing bags on the market have manufacturer specifications on how to effectively sterilize the bottles and feeding accessories. Follow the manufacturers instructions first. However, if you don’t have instructions you can follow the steps listed below. Please be aware you may need to make some little adjustments to the method to suit the type of microwave sterilizer bag you have.

1. Before you place a bottle or any other item to be sterilized into a microwave sterilizing bag it is best that you wash all parts of the bottle with soapy warm and rinse it to get rid of all the impurities.

2. Open the microwave sterilizer bag and add 100 ml of water into the bottom. The water is vital because when it is heated in the microwave it creates steam at 100 degrees Celsius which kills bacteria and sterilizes the bottle. The amount of water you put in may vary depending on the type of bag and the manufacturers’ specifications. However, around 60 to 100ml of water is ideal. Do not use less than 60 ml of water as the bag may over heat and become warped.

3. If you have a bottle rack put it in the microwave to help keep the bag upright.

4. Load the bag with bottles, nipples, breast pump equipment or other feeding accessories into the bag, but do not over load. Note: do not include any items made of metal.

5. Seal the microwave sterilizer bag, and make sure the seal is secure all the way along. To sterilize effectively there must be a tight seal to keep the steam in. If you have over filled the bag there is a chance that the seal might pop open. An open bag will not sterilize the items, so take some items out and make sure it is sealed properly. Once the first batch is sterilized simply repeat the process for other items.

6. Place the bag into the microwave oven and close the door.

7. Set the microwave to High and set the timer for 3 minutes, and turn on. Three minutes is the length of time needed to sterilize a baby bottle for a typical 800 to 1100W microwave oven. Other microwaves may need a longer or shorter time depending on its power. Microwaves ovens over 1100W need only 1.5 minutes (90 seconds) and microwaves between 500 and 750W need 5 minutes. Most microwave sterilizer bags on the market require two to six minutes depending on microwave power – refer to the manufacturers specifications. CAUTION – Do not heat for more than the recommended time.

8. If your microwave does not have a turntable, then rotate the bag half way through the allocated time.

9. After the allocated time, you should leave the bag in the microwave for at least 1 minute to allow it to cool down before removing it.

10. Open the microwave, and using the Easy Pour Grip, remove the sterilizer bag. CAUTION – Use care when removing the bag from the microwave oven, hot water and steam are inside. Let the bag cool down for a further minute if required.

11. Holding the Easy Pour Grip tip the bag down into a sink and pour out any excess water using the notch opening on the side of the bag. CAUTION – Use care when pouring out the excess water from the bag, hot water and steam are inside.

12. Open the bag releasing the seal and remove the contents. CAUTION – hot steam may still escape when bag is opened.

The steps above outline the most efficient way in which you can sterilize your baby’s bottles fast with an Microwave Sterilizer bag. These bags are intended for use only with microwave safe plastics. Note that steam cleaning breast tubing may cause clouding or dis-colouration (which does not affect its performance). Also do not place the bag on metallic grills that come with some microwaves. It is always recommended that you follow the guidelines for use of your microwave oven.

About the Author: Jess Embling runs a business called Easy Bubs Baby Care. She promotes baby products that are healthy for baby and cost effective & convenient for parents, like BPA-free Microwave Sterilizer Bags. They are the easiest and fastest way for

sterilizing baby bottles

and are a great to

sterilize babies bottles

when you travel.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1187868&ca=Advice

Simple Reunion Party Ideas that Make Memories Last

by

A. Myers Kennedy

There is always a feeling of nostalgia that pairs with every reunion. Coming together with family and friends from near and far to recant old memories and ultimately to keep new memories forming. Anxious anticipation as we wonder if someone is going to bring out old embarrassing photos and quiet peacefulness as we imagine visiting with older friends or grandparents for what may be the last time. Regardless of how you think about it, reunions of all sizes are big fun for all invited.

Reunions aren\’t just for family anymore. High school reunions or even collegiate reunions have long been events celebrated every five or ten years. Often times friends who have been separated by life\’s demands plan a yearly camping trip or even just a one day picnic to reunite and stay connected. This is what reunions are all about; keeping the connections that we hold dear strong over the years. The memories that come with reunions are often enough, but for those big reunion events you can add to future nostalgia by including personalized invitations and party favors that are affordable and reunion centric; a lasting keepsake for that even those who don\’t attend can receive. Save the date invitations are a great way to spread the word and keep it stuck fresh in the minds of your reunion party guests. Save the date invitations can be personalized to fit your event and depending on the size of the magnet you order, are quite a cost effective approach to combining a party favor, keepsake and invitation in one item. Adding a great photo from the past reunion party helps to get the conversations flowing and the great memories flooding the gates for each receiver. One very simple and ultra-multi-purpose party favor to add to the list are reunion water bottle labels. These water bottle labels can be adhered to either the reusable stainless canteens for a greener party favor or they can be placed on traditional plastic water bottles. Regardless of what type of container you place your water bottle labels on, water is a necessary element to every summer party; reunions included. This can be especially true if it is a hot summer day or if you are serving adult beverages at your reunion party as sending guests home with a fresh and personalized bottle of water is a very adult option. Reunion water bottle labels aren\’t just for water bottles. We mentioned above about the reusable stainless bottles, but the size of the standard water bottle labels fits perfectly with just about any beverage container. Cover soda cans and bottles, bottled vodka drinks and even your red solo cups can be upgraded with these simple personalized bottle labels. While water bottle labels will fit most items, you may need to purchase wine bottle labels or champagne bottle labels for your reunion as the size of these bottle labels is much larger. Great news is that these reunion wine bottle labels are 100% available and 100% affordable and a great addition to any reunion party. Adding disposable cameras to the tables at the reunion is a great way to capture those moments that some other party go or none party goers may have missed. Sure lots of people will have cameras on hand, but those little disposables still do a great job of being in hand at just the right moment. If you don\’t want to spend money on the disposables (since affordable is the name of the game these days) then consider opening a free photo sharing website that guests can upload their own reunion party pics to for sharing. Reunions are all about the memories and creating new memories is just as important as reminiscing over the old. Make great memories with awesome low cost keepsakes that keep the story about the reunion going year round.

Find all your

Reunion Save the Date Invitations

and other personalized reunion party favors at MagnetsAndLabels.com

Article Source:

ArticleRich.com

Best Personal 3D Printers

by

3dprinterhub

3D printing is like no kind of manufacturing before it. Instead of cutting away layers of the raw

material to create the desired product, 3D printers add layers. This type of process is referred to

as additive manufacturing and has been used for decades by large corporations to create mockups

and prototypes. Until recently, additive manufacturing was cost prohibitive to all but Fortune 500

companies.

With the advent of small, low-cost personal 3D printers, this technology can be utilized by

everyone from small businesses to artists and hobbyists to create nearly any 3 dimensional object

imaginable. There are dozens of personal 3D printers available on the market today, but a few

stand out from the rest as the best 3D printer. If you are in the market to buy a 3D printer, here are

several choices you should consider.

Portabee 3D Printer: This was the world s first portable personal 3D printer. Weighing only

3 kg, this desktop 3D printer is collapsible in minutes and comes with its own carrying case. In

addition to being affordable and portable, the Portabee is reliable and easy to use.

Durbie Prusa Mendel Kit: This 3D printer is a classic RepRap design that has been tried, tested

and found to be one of the best 3D printers on the market. The sturdy frame is made of stainless

steel rods and the kit comes with 800 gm of PLA filament.

RapidBot: This is another kit from MakeMendel, one of the best 3D printer companies. It is a

high quality personal 3D printer that can be assembled easily. One of the reasons this is a best 3D

printer is because of its high level of accuracy and the integrated power supply.

ShareBot: Another that could be considered the best personal 3D printer is the ShareBot. With its

solid wood frame, accuracy and durability, the ShareBot is an excellent intro 3D printer.

Felix: This kit is one of the best 3D printers because it was born out of decades of experience in

high-precision mechatronics and industrial automation. The aluminum frame is strong enough to

withstand the highest accelerations, resulting in higher quality prints. Felix is another one of the

3D printer companies you can count on for quality.

Leapfrog Creatr: This stylish, durable personal 3D printer is packed with powerful features such

as a dual-extruder for larger print jobs. It does not require any assembly and is accurate down to

the .05 mm, making it a best 3D printer.

More Details:

personal 3d printer3d design software3d printing

Article Source:

ArticleRich.com

Submitted by: Bruce Deitrick Price

Our educators aren t very good at raising SAT scores, increasing literacy, or spreading knowledge. But they are world-class at making excuses.

Let me rattle off a few. Money! You know money is always the problem. If only taxpayers weren t so selfish. Violence! This is a big deal. All the students are in gangs or fighting in the halls. Broken homes, divorce, domestic tensions! How can children concentrate? Even if the home is stable, kids are watching TV or goofing off on the Internet. That s a huge problem. Or they re sending text messages on their phones. Or spending hours with their video games. No wonder that schools can t get good results! Did we mention drugs? Kids are shooting up or stoned on marijuana. What else? They re hanging around malls, wasting time and going to bad movies. What can you expect when most kids are lazy or ADD? The parents are ignorant and won t help. The problems never stop. Not to mention, all the schools are too crowded. Teachers are overworked, and the whole system is broken from top to bottom and about to collapse…

In fact, there is only one thing our educators are better at than making excuses. And that is coming up with bad ideas.

Gee, probably there s a connection. Maybe if our elite educators stopped inventing pedagogical gimmickry, they would not need excuses.

Here s just a quick survey of education gone bad:

Starting in 1930, our educators have been insanely devoted to a reading method variously called Look-Say, Sight Words, Dolch Words, Whole Language, and Balanced Literacy (with so many aliases, you know it s a criminal). This gimmick has resulted in 50 million functional illiterates and a million dyslexics. Whole Word requires that children memorize words by their shapes, at a pace of about 300 words per year. Do the math. By the end of high school, students will know only 4000 words and be, for scholastic purposes, illiterate.

Speaking of math, our educators show a similar incompetence when they pick math pedagogies. Around 1960 educators said that New Math was the answer. Five years later they said, never mind. In fact, they went back to their laboratories and devised variations of New Math, which they called Reform Math, but the rest of the world sarcastically labeled New New Math. Some of the familiar variations are Everyday Math, MathLand, TERC, etc. All these pedagogies engage in the same trick: they mix in college-level terms and perspectives, while refusing to teach any of the standard methods for addition, multiplication, etc. Such approaches virtually guarantee children will never master ordinary arithmetic.

Meanwhile, a non-subject called Social Studies (truer name: Socialism Studies) appropriated everything it could grab–geography, politics, economics, civics, history–and tries to substitute PC opinions for knowledge.

Meanwhile, across ALL subjects, and all ages and grades, our educators sabotage what s left of the traditional curriculum by insisting that children need not memorize anything. Not a single fact. Additionally, educator are in love with constructivist thinking, whereby students are supposed to invent their own versions of everything. Which can take a long time. Our educators are similarly enamored of cooperative learning, whereby children do everything in groups, thereby guaranteeing that children will not be able to think independently. Another fad that cuts across all subjects is what might be called sloppy thinking–fuzzy math, fuzzy English, fuzzy everything. Close is good enough.

Imagine the cumulative impact of all the shoddy pedagogies described so far. You will easily imagine schools doing a very bad job. You will easily imagine a perpetual need for excuses, excuses, excuses.

I suggest it doesn t matter how much money you give these people. Nothing will improve until you take away their bad ideas. Educators are not a very glamorous group but I now think they have one thing in common with our Hollywood stars. They need to go to rehab now and then. For their own good. Somebody needs to take away their pills and bottles. Give them back their self-respect. Give them a life without excuses.

About the Author: Bruce Deitrick Price is a novelist, artist and education activist. His main site is

Improve-Education.org

which now features 40 original articles on a range of topics, birds to robots, Latin to sophistry, phonics to Reform Math. If you love passionate non-fiction, you’ll love this site.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=342976&ca=Education